Belt oil skimmers are used in various types, portable and fixed, and in various materials. This is one of the most common oil skimmers, which is also produced by Mahar Fan Abzaar Company. We usually use this method when we have a large leak and a thick oil surface.
Belt oil skimmer introduction clip
Belt oil skimmer operation training clip
Steel Belt Oil Skimmer Clip
Oil absorption clip by belt oil skimmer
Steel Chain Belt Oil Skimmer Clip
Oil Skimmer Stainless Chain / Stainless Mesh Type / Belt Type
** No consumables
Applicable to separate oil water in CNC machines, restaurant, resource recycling industry, mainly floating oil can be removed by oil skimmer
. Guarded with metal
- Comparison of oil skimmer types
Disc type: shallow, invalid if water level is low
Belt type: Fear of heat, acid and alkali
Rigid strap type: afraid of bending and deformation
+ Chain type: not afraid of heat, acid and alkali resistance, not afraid of folding, not easy to deform, no need for oil and water separation box, good performance and easy to clean
The 1U oil skimmer removes oil and grease floating on the surface of various liquids such as lubricating cooling emulsions, cooling water, degreasing agents, sewage, etc. in small tanks in a simple, fast and reliable way.
Technical information: Oil skimmer model FRIESS 1U:
A small compact device for tanks with a maximum area of 1 m2
| Minimum tank surface size: | 400 mm x 400 mm |
| Maximum transfer height: | 0.6 meters |
| Collector pipe length: | Maximum 3000 mm |
| Oil flow rate: | 2-30 liters per hour |
| Working temperature: | -20°C / +95°C |
| Driving system: | 1 gear motor |
| Power | 0.09 kW |
| Voltage: | 230V single phase / 400V three phase |
| Dimensions (length x width x height): | 128 × 224 × about 270 mm |
| Weight: | Approximately 10 kg |
The technical data provided reflects the current state of the art and is not intended to guarantee specific features of the products or their suitability for a particular purpose.
3D printing of end-use parts used in belt oil skimmers
The company’s technicians decided to apply 3D printing elements to a belt oil skimmer . This device is used to remove oil buildup in coolant.
The separator belt immersed in the liquid collects the oil thanks to electrostatic adhesion.
Additionally, a skimmer separates the oil from the belt and directs it to a separate tank.
Materials
3D printing
Facilities
Project
Using two different 3D printing materials (PEKK and ASA) to produce end-use parts for a belt oil skimmer.
Goals
1. Reduce maintenance costs
PEKK material is characterized by high wear resistance, so in some applications it is able to replace elements usually made of steel or other metal alloys. Using this filament to print an oil skimmer made it possible to replace a 316 grade steel part. Its use enabled the company to reduce wear and tear on the conveyor belt. The 3D printed part on the 3DGence INDUSTRY F340 reflects low wear in contact with oil during lubrication and is resistant to most types of coolants and oils.
2. Reduce maintenance costs
Meprozet 3D printed motor housing with ASA material. This filament is characterized by increased chemical resistance to oils and greases used in the engineering industry, so it has proven itself well in this project. 3D printing allows the company to produce just a few housings at a very low cost. In addition, the company had the opportunity to test more iterations and adjust the product to its customer.